|
|
 |
|
|
| We at Liberty-izone Ltd understand that public broadband Internet
is still a relatively new technology and a new phenomenon in
the general public. To that end, we have thought of your needs
for connection to Liberty-i by providing supporting technologies
that make it even easier for you to get connected, especially
if the venue you are at is served largely by wireless coverage,
or you have never encountered wireless Internet before. |
| |
| Liberty-i Start up Kit |
The Liberty-i start up kit consists of a CD containing software
and a PCMCIA slot wireless (IEEE 802.11b) adaptor card. The
software is largely intuitive and guides you through each section
of the upload process. If you are using a PC running Windows
XP™ for example, you may not need to use it (so long as your
Windows XP™ software updates are regularly loaded). However,
if you are using Windows™ 98/98SE or 2000 you will need the
disk if you choose to use our wireless adaptor.
If you purchase this from the venue you are at, don’t worry,
you can use it on any other public or private wireless LAN in
the world so long as it conforms to IEEE 802.11b – the Global
Wi-Fi Standard. |
| |
| Ethernet – Wireless Converter |
| If you have a PC or MAC Notebook where you either cannot (due
to corporate I.T policies or Administrator restrictions) or
do not wish to load third party software, Liberty-izone Ltd
has the answer! Liberty-i is agnostic of internal PC or MAC
IP configuration, all you need to do is get physically connected!
That’s why we have our Ethernet – wireless LAN converter. No
set up, no messy alteration of internal client device attributes,
just plug an Ethernet cord (supplied) between the converter
and your device’s Ethernet port, boot your device and select
the Internet, and you will see the Liberty-i portal page. It’s
as easy as 1-2-3, and you’re on the high speed Internet where
and when you need it! You can purchase these converters, or
in some of our venues they will loan or rent the equipment to
you. |
| |
| AirHub |
| Liberty-izone’s AirHub is designed to facilitate the connection
of up to 12 client devices to a venue’s wireless LAN where the
devices are not equipped with wireless functionality or where
customers choose only to connect via Ethernet. Again its very
simple; take AirHub to the location you need to use it in, power
it up and connect up to 12 clients. Then customers can individually
go to the Internet! So simple, you can get a meeting ready for
broadband Internet in just 5 minutes! |
|
|
